Cleveland’s

Slowing working on the Cleveland brakes. Sent off the brake lines to get rebuilt and while they are gone I’m working on the calipers.

I had bead blasted the outsides and cleaned them well, but because the aircraft had sat since 1983, there was residue of the O-ring on the bore of the caliper.

I used some X-50 anti-corrosion spray and a scotchbrite to clean that area up. In the picture below you can just see that ring in the bore of the caliper on the Left and how clean the one of the right is.

Aslo found out Univair sent me the wrong -O-ring for the Piston.

Will Ware

Author: Will Ware

I live in Rockwall Texas and I’m rebuilding a 108-1. I’m a Captain at Southwest Airlines but I LUV taildraggers.

Leave a Reply