Control Column rebuild

OK, Rule #1, MARK ALL PARTS as you remove them! I failed to do that, as I assumed, they were all the same.

Turns out the Pulleys where the aileron cable attaches are different, however there are no markings on the pulleys themselves.

I did pull the Pulleys off, remove the control yoke bushings and universals. The Pulleys were sandblasted, primed and painted. The bushings were cleaned and the universals were inspected and cleaned.

I did order some new pulleys (Phenolic ones) as they are cheap and easy to change now.

I’m expecting the Control Coumn to come back from powder coating this week and I plan to re-assemble and install the control column this week end.

Next will be the Rudder pedal assymembly.

Below are some pics and the chart of parts for the Control Column

Will Ware

Author: Will Ware

I live in Rockwall Texas and I’m rebuilding a 108-1. I’m a Captain at Southwest Airlines but I LUV taildraggers.

Leave a Reply